Using the Printer Software with Windows 71
4
4
4
4
4
4
4
4
4
4
4
4
9. After printing on one side, reload the paper into the MP tray
with the printed surface face-down as shown below. Then,
press the x B&W Start or x Color Start button.
Note:
❏ Manual duplex printing may not be completed normally when
printing a document for which the paper size, orientation, or paper
source setting is set to change in the document.
❏ When doing duplex printing manually with collate set on the printer
driver, the printing may not be completed normally depending on
the application you use.
❏ When loading the paper, straighten it well. If curled paper is loaded,
it may not be fed correctly.
To Next Page
Loading...
