ETC Element - Page 418

406 Eos Family v2.9.0 Operations Manual
•
Share Media Archive (on page408)
•
Latitude (on page408)
•
Longitude (on page408)
•
Calibrate Elo Touchscreens (on page408)
•
Calibrate ETC Touchscreens (on page408)
•
Monitor Arrangement (on page409)
•
Software Update (on page410)
Device Name
This specifies the name the desk will use to identify itself on the network to other devices.
Examples might be Booth Desk and Tech Table.
24 Hour Format Clock
The time is displayed in a 24-hour format as HH : MM : SS. By default this is disabled. Click to
enable.
Time
The time the desk is using. This can be changed manually (direct data-entry) or via SNTP
(Simple Network Time Protocol) time service. Please see Network Settings (on page411) for
more information.
The time defaults to 12 hour format. To use 24 hour format, make sure {24 Hour Clock} is
checked. See 24 Hour Format Clock (above) .
Date
The date the desk is using. This can be changed manually (direct data-entry) or via SNTP
(Simple Network Time Protocol) time service. Please see Time Service (SNTP) (on page418) for
more information.
The date is displayed as DD / MM / YYYY.
Time Zone
The time zone the desk is using. This is an offset from Greenwich Mean Time (GMT). Each
setting in the pull-down list displays the offset, the name of the time zone and a couple of cities
in that time zone.
Language
Allows you to select the display language of Element. Choices include English, Catalan,
Bulgarian, German, Spanish, French, Italian, Slovak, Turkish, Japanese, Korean, Russian,
Chinese - simplified, and Chinese - traditional.
Keyboard
Allows you to select the language for the alphanumeric keyboard within Element. A wide
variety of keyboards are supported.
The keyboard can also be changed in the application when the virtual keyboard is open. Click
on the flag icon to see a language drop-down menu.
Press {Sym} to switch the keyboard from alphanumeric to symbols. When in symbol mode, press
{Abc} to return to the alphanumeric keyboard.