System Basics 43
Multicell Devices
Parameter data can also be suppressed in the same way as moving lights.
You can use flexichannel modes to hide cells or master channels. See
Using Flexichannel (on
page47)
for more information.
When in Flexi Cells Off mode, the master channel will display its own information in the normal
font size, and data indicators will be used for the cells. If all of the cells are at the same value,
that value will display. If the majority of the cells are at the same value, that value will be
displayed with a superscript plus sign. If there is not a majority, just a plus sign will be used.
Note: A decimal will display at the end of a master channel when flexi cells off is on.
To Next Page
Loading...
