7-26 031914
SLICING CONVEYOR INDEX LENGTH: The “Slicing
Conveyor Index Length” parameter programs the travel
distance of the Slicing Conveyor belts when transferring
product onto the Transfer Conveyor. (Illustration 58)
SLICING CONVEYOR DELAY TO RAPID: The “Slicing
Conveyor Delay to Rapid” parameter allows you to
delay the start of the rapid transfer of the product, off of
the Slicing Conveyor and onto the Transfer Conveyor.
(Illustration 59) This parameter is set as a number of
slices, or blade rotations. If the last slice or slices of the
draft or stack have not completely landed prior to the
rapid transfer of the product, you can set the number of
blade rotations to delay before starting the transfer.
TRANSFER CONVEYOR INDEX LENGTH: The
“Transfer Conveyor Index Length” parameter sets the
travel distance of the Transfer Conveyor belts when
transferring completed stacks or drafts to the Scale
Conveyors. (Illustration 60)
ILLUSTRATION 58
SLICING CONVEYOR INDEX LENGTH
ILLUSTRATION 59
SLICING CONVEYOR DELAY TO RAPID
ILLUSTRATION 60
TRANSFER CONVEYOR
INDEX LENGTH
To Next Page