Blade Retract: The Blade Retract
screen allows you to test the
operation of the M2 Linear Actuator
that retracts and advances the Knife
Blade. (Illustration 36)
Home: Moves Knife Blade away
from the Shear Edge to the
“Home” position.
Move Forward: Moves Knife
Blade away from the Shear
Edge.
Move Backward: Moves Knife
Blade towards the Shear Edge.
Reset Fault: Resets Faults.
Stop: Stops the “cycle” of the
Knife Blade.
E-Stop: Stops the movement of
the Knife Blade.
031914 M2-23
ILLUSTRATION 36
HOME
MOVE
FORWARD
MOVE
BACKWARD
RESET
FAULT
STOP
ESTOP
To Next Page
Loading...