Formax PowerMax 3000 - Page 208

M2-26 031914
Classifier #1, #2, and #3: The
Individual Classifier screen allows you to
test the operation of each Accept/Reject
Conveyor. (Illustration 40)
Accept: Raises the Accept/Reject
Conveyor.
Reject: Lowers the Accept/Reject
Conveyor.
Cycle: Cycles the Accept/Reject
Conveyor “up” and “down.”
Stop: Stops cycle of the
Accept/Reject Conveyor.
All Classifiers: The All Classifiers
screen allows you to test the operation
of all of the Accept/Reject Conveyors.
(Illustration 41)
Accept: Raises the Accept/Reject
Conveyors.
Reject: Lowers the Accept/Reject
Conveyors.
Cycle: Cycles all of the
Accept/Reject Conveyors “up” and
“down.”
Stop: Stops cycle of the
Accept/Reject Conveyors.
ILLUSTRATION 40
ACCEPT
REJECT
CYCLE
STOP
ILLUSTRATION 41
REJECT
STOP
ACCEPT
CYCLE