CR Console Operation Manual
3 - 68 2011. 06 897N0519M
NOTE
When you are using the Retake Analysis function (Retake Analysis Software), make sure to select
any of the comments listed in the “Cause of mis-exposure (rejection)”. It is not allowed to input a
free comment in this box.
Select then
. The box will be closed to complete the necessary input. The image will thus be
handled to be failed.
: Cancels operations. Note, however, that the state of mis-exposure will not be changed.
The box shown above opens also when canceling the state of mis-exposure.
remains unselected.
If
is selected while in this state, the box will be closed to cancel the rejection state.
NOTE
Whenever a change was made for the “Classification”, be sure to re-select the “Cause of mis-
exposure (rejection)”.
To Next Page