CR Console Operation Manual
3 - 2 2006. 10 897N0519C
3.1 Receiving Studies
3.1.1 Inputting Patient Information
Inputs patient information as follows.
All of the patient information items need not be input necessarily. Input in any one of the items in
order to proceed to the next operation.
The patient information (either Patient ID or Patient Name is necessarily input.), once received, is
automatically registered to the database. The previously registered patient information can be called
up from the database and displayed on the “Patient Information Input Screen” as desired.
(1) Inputting Patient Information in the “Patient Information Input Screen”
Input data to each item of patient information in the patient information input field.
After inputting characters, select
or press the ENTER key (or TAB key) on the keyboard.
The caret “
|
” for character input will move to the next input box.
As patient information can also be input on the Exposure Menu Selection Screen or Study Execution
Screen later, you can proceed the operation without inputting any patient information at this step.
To correct wrong input
Described below is how to correct characters input in the entry fields on the “Patient Information
Input Screen”.
When a keyboard is used :
As generally practiced in PC operation, use the BackSpace key to erase the input character
immediately before the caret and modify it. Or move the caret “
|
” using the arrow key to the
character you want to correct.
When a screen keyboard is used :
Use the arrow keys to move the caret “
|
” immediately after the character you want to correct, and
select
. The character immediately before the caret “
|
” will be erased. Or move the caret “
|
”
to immediately before the character you want to correct, and select
. The character immediately
after the caret “
|
” will be erased. Make then necessary corrections accordingly.
To Next Page
Loading...