CR Console Operation Manual
2011. 06 897N0519M 1 - 3
1.1.2 Cautions in Using This Equipment Within the Patient Environment
When connecting to other equipment such as an Image Reader, ensure that the equipment to be
connected is installed properly so that it can be used safely.
For details of installation of equipment to be connected, see the documents provided with it, and
contact our service engineer as necessary.
While this equipment is in operation, pay due attention not to have the patient come into direct
contact with it.
1.1.3 Cautions in Using a USB Memory
• When purchasing a USB memory, note the following points:
• Purchase a product that complies with the FCC/VCCI/CE standards or equivalent.
• Select a product that supports USB2.0 specification.
• Select a product that does not require you to install an exclusive driver or software.
• Select a product with a capacity of 2GB or more.
• Make sure that the product operates normally by performing “Write/Read & Compare” in
Windows Explorer.
If you have any enquiries, contact our authorized distributor.
• When using a USB memory, be careful not to lose it by mistake.
• Connect only one USB memory.
If more than two USB memories are connected simultaneously, they may not operate normally.
• When removing a USB memory from the personal computer, select “Safely Remove Hardware”,
and make sure that the USB memory access lamp is not flashing.
To Next Page
Loading...