FujiFilm CR Console - EDR Mode; Film Output Format

CR Console Operation Manual
3 - 36 2011. 06 897N0519M
(2) Film output format
Sets the format of the film to be output.
Select the parameter display field of
to display the setting box.
Select one of the icons.
“Film output format setting box”
:Cancels operation.
: One-image format.
: Two-image format.
(3) EDR mode
Sets the EDR (Exposure Data Recognizer) mode.
Select the parameter display field of
to display the setting box.
Select one of the icons to make necessary settings, and then select
.
“EDR setting box”
:Cancels operation.