CR Console Operation Manual
2011. 06 897N0519M 3 - 43
: Standard density.
: High density.
The 14" x 14" or 14" x 17" sized images to which the standard density is set will be reduce-sized
images (67%) when they are output to film with one-image format at destination units.
(12) Trimming
Sets trimming processing. When the user authentication has been specified according to the setting
performed at installation, the user is allowed to limit the use of this function. For more information,
refer to [
Chapter 3 TABLE SETTING / CR Console OPERATION MANUAL - THE USER
UTILITY OPERATIONS
].
Select the parameter display field of
to display the setting box. (The parameter display box of
can be selected only when the trimming option has been activated.)
Select an extraction size, reference position for extraction, and direction for image extraction, and
then select
.
“Trimming setting box”
: Trims a read image to the 14”x17” size.
: Trims a read image to the 14”x14” size.
: Trims a read image to the 10”x14” size.
: Trims a read image to the 10”x12” size.
: Trims a read image to the 8”x10” size.
: Trims a read image to the 18x43cm size.
: Trims a read image to the 18x24cm size.
: Trims a read image to the 17”x17” size.
To Next Page
Loading...