CR Console Operation Manual
5 - 12 2006. 10 897N0519C
(4) Updating the List
Updates the list and lists the latest information. This function is valid for all the lists.
Select
.
(5) Terminating Studies
Terminates the study for which the exposure has not been completed. This function is valid for
“Local WL”.
By performing this operation, the study is terminated with the preset condition. This terminating
condition can be set with the User Utility. For more information, refer to [
Chapter 4 PROPERTY
SETTING / CR Console OPERATION MANUAL - THE USER UTILITY OPERATIONS
].
Select
after selecting the study. To make selection of studies, selecting them while holding
down the Ctrl key or Shift key enables you to specify a multiple-study range.
If the exposure menus to which the IP registration has been done but before the image reading still
remain in the study, the study cannot be terminated.
To Next Page