CR Console Operation Manual
1 - 4 2009. 09 897N0519H
1.2 Electromagnetic Compatibility (EMC)
■
Electromagnetic Compatibility (EMC) Related Standard
This equipment complies with the following standard regarding Electromagnetic Compatibility
(EMC).
EMC standard : IEC 60601-1-2:2001+A1:2004
This does not guarantee that there is no harmful electromagnetic interference under any
installation environment.
This equipment can generate, use and radiate radio frequency energy. If the equipment is not
installed and used in accordance with the instructions, or if peripheral devices that are not
complied with the EMC standard, harmful interference may be generated under a particular
environment causing malfunction of the equipment and other devices.
If this equipment causes harmful interference to other devices, or if this equipment is affected by
interference from other devices, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the device.
• Increase the separation between the equipment.
• Connect the equipment into an outlet on a circuit different from that to which the other device(s)
are connected.
If the problem cannot be solved with the above measures, stop using this equipment and consult
the
manufacturer or our official dealer for help.
WARNING
Do not place devices generating electromagnetic wave near this equipment.
To Next Page
Loading...