Configuration Notifications
U41840-J-Z125-7-76 323
To add a destination:
1. Click Add.
The Add Trap Destination page displays (see Figure 200).
Figure 200: Add Trap Destination
2. Enter information about the destination:
● IP Address - Enter the IP address of the system that will receive the traps
generated by the ETERNUS CS800.
I
When entering IP addresses, never use an address that is in a reserved IP
address range. To see a list of reserved IP address ranges, click the quick
tip icon [?] located near the IP address field.
I
To use hostname format, you must specify at least one DNS IP address on
the Network page (see "Network" on page 286).
● Name - Enter the name of the destination.
3. Select one or more traps to send to the destination:
To Next Page
Loading...
