Notifications Configuration
322 U41840-J-Z125-7-76
Figure 199: Destinations Page
Use the Destinations page to perform the following tasks:
● View information about SNMP destinations (see "Trap Destination List" on page 322).
● Add an SNMP destination (see "Adding a Destination" on page 322).
● Edit an SNMP destination (see "Editing a Destination" on page 324).
● Delete an SNMP destination (see "Deleting a Destination" on page 325).
Trap Destination List
The Trap Destination List displays the following information about SNMP destinations:
● IP Address - The IP address of the destination.
● Name - The name of the destination.
● Selected Traps - The traps the ETERNUS CS800 sends to the destination (Failure,
Warning, Informational, Available, or Unavailable).
Adding a Destination
Add an SNMP destination to send traps from the ETERNUS CS800 to the destination.
I
You can add up to 5 destinations.
To Next Page
Loading...
