Fujitsu M10-4 - Page 220

Figure 9-23
Pulling out an XSCF board (for the SPARC M10-4S with a FRAME-A/
FRAME-B CPU memory unit)
5.
Remove the screw fixing the XSCF mount.
-
For the SPARC M10-4/M10-4S with a FRAME-A CPU memory unit
Remove the one screw securing the XSCF mount (A in the figure).
Fujitsu M10-4/Fujitsu M10-4S/SPARC M10-4/SPARC M10-4S Service Manual
･
November 2014206