Fujitsu M10-4 - Chapter 7 Maintenance Flow; Maintenance Workflow

Start of replacement work
Start of installation work Start of removal work
1
. Identify FRU to be replaced
2. Check available maintenance types
Determine maintenance
types (*1)
3. Active maintenance (*2)
4. Inactive maintenance
5. System-stopped maintenance
Chapter 7
Maintenance Flow
This chapter describes the maintenance workflow.
■
Maintenance Workflow
■
FRU Replacement Workflow
■
FRU Installation Workflow
■
FRU Removal Workflow
7.1 Maintenance Workflow
Figure 7-1
Maintenance workflow
111