Fujitsu M10-4 - Downloading Error Log Information; Maintenance Precautions; Precautions for Replacement

XSCF>

setlocator

-b

0

blink
XSCF>

snapshot

–
d

usb0

–
L

F

–
r

–
a

–
v
Testing

writability

of

USB

device....SUCCESS
About

to

remove

all

files

from

device

'usb0'.

Continue?

[Y|N]

:

y
BB#00:

start

to

execute

snapshot
BB#01:

start

to

execute

snapshot
.
.
Collecting

data

into

/media/usb_msd/<hostname>_<ipaddress>_<date>.zip
Data

collection

complete.
The CHECK LEDs on the operation and rear panels blink.
The chassis requiring maintenance in the following execution example is the
master chassis. When specifying a different chassis such as BB#01, set "setlocator
-b 0 blink".
For details on where to find and how to check the CHECK LEDs, see "2.4
Checking the LED Indications."
4.2.3 Downloading error log information
This section describes the operations for downloading error log information.
To download error log information, use the XSCF log fetch function. The XSCF unit
has a maintenance USB port so that maintenance information such as error logs can
be obtained easily. (The port is marked as MAINTENANCE on the rear panel.)
For
details, see "12.1.15 Saving a log to a file with snapshot" and "12.1.16 Saving a log
to a local USB device" in the Fujitsu M10/SPARC M10 Systems System Operation and
Administration Guide.
In the following example, detailed information on the error logs of all chassis in the
system in a
building block configuration is downloaded to the USB memory
connected to the USB port.
4.3 Maintenance Precautions
This section describes the precautions for maintenance.
4.3.1 Precautions for replacement
This section describes the precautions for replacement.
Note the following points when replacing the CPU memory unit, PSU backplane
Chapter 4 Preparation and Precautions for Maintenance 47