Fujitsu M10-4 - Removing Memory

Note -
Be careful not to drop the screw being installed onto the board of the CPU memory
unit lower.
Note -
Install the microSD card that was supplied with the new CPU memory unit lower in
the removed CPU memory unit, and return them together.
Figure 9-59
Installing a microSD card
7.
Place the protective tape of the microSD card back in place and attach the
adhesive part. Then, fix it with the screw.
9.6 Removing Memory
This section describes the procedure for removing memory.
Fujitsu M10-4/Fujitsu M10-4S/SPARC M10-4/SPARC M10-4S Service Manual
･
November 2014238