Fujitsu M10-4 - Appendix D External Interface Specifications; Serial Port; D.1 Serial Port

Table D-1
Serial port
Pin arrangement Pin
number
Signal
name
Input/Output Description
1 RTS Output Transmission request
2 DTR Output Data terminal ready
3 TXD Output Transmitted data
4 GND --- Ground
5 GND --- Ground
Appendix D
External Interface Specifications
This appendix describes the specifications of the external interface connectors and the
switch for the XSCF provided on the SPARC M10-4/M10-4S and the crossbar box.
The external interface connectors provided on the SPARC M10-4/M10-4S are as follows.
■
Serial Port
■
USB Port
■
SAS Port
The external interface connectors provided on the crossbar box are as follows.
■
Serial Port
■
USB Port
The switch for the XSCF that is provided on the SPARC M10-4/M10-4S will be as
follows:
■
RESET Switch
D.1 Serial Port
Table D-1 lists the specifications of the serial ports of the SPARC M10-4/M10-4S and
the crossbar box.
323