Fujitsu M10-4 - Chapter 10 Maintaining The Internal Disks; Configuration of the Internal Disks

Chapter 10
Maintaining the Internal Disks
This chapter describes the procedure for maintaining the internal disks mounted in
the SPARC M10-4/M10-4S. An internal disk can be replaced, expanded, or reduced.
■
Configuration of the Internal Disks
■
Removing an Internal Disk
■
Installing an Internal Disk
10.1 Configuration of the Internal Disks
This section describes the configuration and locations of the internal disks.
The chassis has eight slots for mounting internal disks. The system memory storage
can be expanded by installing extra hard disk drives (HDDs) or solid state drives
(SSDs) in these slots.
253