Fujitsu M10-4 - Page 251

Note -
With the pin surface of the microSD card facing downward, insert the card.
Note -
Push in the microSD card firmly until you feel it lock in place.
Figure 9-58
Removing a microSD card
5.
Remove the microSD card from the new CPU memory unit lower.
Perform the same procedure as steps 1 to 4.
6.
Insert the microSD card that was removed in step 4 into the microSD card slot
of the new CPU memory unit lower. Then, push it
in with a finger until it locks
in place.
Chapter 9 Maintaining the CPU Memory Unit/Memory 237