Fujitsu M10-4 - Page 88

XSCF>

poweroff

-a
PPAR-IDs

to

power

off:00,01,02
Continue?

[y|n]

:
y
00

:

Powering

off
01

:

Powering

off
02

:

Powering

off
Note -
The order in which guest domains shut down depends on the shut-down group
setting of Oracle VM Server for SPARC.
Note -
For a building block configuration, check the POWER LEDs on all the chassis that
make up the system.
XSCF>

showpparstatus

-a
PPAR-ID

PPAR

Status
00

Powered

Off
01

Powered

Off
02

Powered

Off

XSCF>

showdomainstatus

-p

0
Logical

Domain

Name

Status
primary

Solaris

powering

down
4S-159-D0-G0

Solaris

powering

down
4S-159-D0-G1

Solaris

powering

down
4S-159-D0-G2

Solaris

powering

down

The following processes are performed.
- Oracle Solaris is completely shut down.
- The system stops and enters the POWERON READY state (The XSCF is running).
4.
Check that the POWER LED on the operation panel is off.
5.
Execute the showpp arstatus command to confirm that the power to the
physical partition is turned off.
In the following example, [PPAR Status] displays "Powered Off" for PPAR-IDs
00, 01, and 02, indicating that the power to all the physical partitions
has been
turned off.
6.
Execute the showdo mainstatus command to check the operating condition of
the logical domain.
In the following example, [Status] displays "Solaris powering down" for the
logical domains, indicating that Oracle Solaris is shutting down.
Fujitsu M10-4/Fujitsu M10-4S/SPARC M10-4/SPARC M10-4S Service Manual
･
November 201474