▶
"Removing the crossbar" on page 62.
Removing the defective TPM
▶
Remove the TPM, see
"Removing the TPM" on page 394.
▶
Leave the TPM spacer on the system board when removing the defective
TPM.
Installing the new TPM
The TPM spacer is already present on the system board.
▶
Install the TPM, see "Installing the TPM" on page 391.
Concluding steps
▶
"Installing the crossbar" on page
63.
▶
"Installing the fan holder" on page 61.
▶
"Installing the air duct" on page 59.
▶
"Reassembling" on page 51.
▶
"Connecting the power cord" on page 56.
▶
"Switching on the server" on page 57.
▶
"Resuming BitLocker functionality" on page 88.
You can find information on configuring the TPM in the corresponding
BIOS Setup Utility reference manual.
System board and components
400 Upgrade and Maintenance Manual RX2520 M5
To Next Page
Loading...
