Checking the label
▶
If available, check the label on the controller. Beside the part number
, you
may find the GUID address.
Using the vendor tools in a Legacy BIOS
▶
To get the GUID address use the vendor tools, see "Using the vendor tools
in a Legacy BIOS" on page 91.
5.3.16.5 Looking for SAS addresses of SAS controllers for external
devices
There are several possible locations where these addresses can be found.
▶
Inform the customer about the new SAS address. The customer need the
new SAS address, especially when the server is connected to a Fujitsu
Storage ETERNUS system.
Using the vendor tools in a Legacy BIOS
▶
To get the SAS address use the vendor tools, see "Using the vendor tools
in a Legacy BIOS" on page 91.
Using ServerView RAID Manager
▶
Start the ServerView RAID Manager and log in.
▶
Select the desired SAS controller.
In the General tab you can find data on the selected object including its SAS
address.
For more information, see the "ServerView Operations Manager - Server
Management" user guide and the "ServerView RAID Manager" user
guide.
Basic software procedures
RX2520 M5 Upgrade and Maintenance Manual 93
To Next Page
Loading...
