12.5.3 Replacing the RDX drive
Upgrade and Repair Unit
(URU)
Hardware: 10 minutes
Tools: Phillips PH2 / (+) No. 2 screw driver
Preliminary steps
▶
Ask the system administrator to eject all remaining backup or optical media
from the backup or ODD before removing it from the server.
▶
"Suspending BitLocker functionality" on page
65.
▶
"Shutting down the server" on page 45.
▶
"Disconnecting the power cord" on page 46.
▶
"Getting access to the component" on page 47.
▶
"Removing the air duct" on page 58.
▶
"Removing the fan holder" on page 60.
Removing the defective RDX drive
▶
Remove the RDX drive, see "Removing the RDX drive" on page 339.
Installing the new RDX drive
▶
Install the RDX drive, see "Installing the RDX drive" on page 334.
Concluding steps
▶
"Installing the fan holder" on page 61.
▶
"Installing the air duct" on page 59.
▶
"Reassembling" on page 51.
▶
"Connecting the power cord" on page 56.
▶
"Switching on the server" on page 57.
Accessible drives
342 Upgrade and Maintenance Manual RX2520 M5
To Next Page
Loading...
