5.3.17 Using the Chassis ID Prom Tool
The front panel (front panel module, front panel board or front panel on QRL)
contains the Chassis ID EPROM that stores the following system information:
–
server name and model
–
housing type
–
serial number
–
manufacturing data
–
information depending on the configuration:
–
installed HDD/SSD backplanes
–
installed extension boxes
– installed expansion cards (for example Retimer, EP5xxi)
In order to integrate your system into the ServerView Management
environment and to enable server installation using the ServerView Installation
Manager, system information needs to be completed and corrected.
System information has to be updated after one of the following tasks:
–
Front panel module
– replacing (with the same type)
– changing (from front panel module 2.5-inch to front panel on QRL)
–
HDD/SSD backplane (2.5-inch, 3.5-inch, PCIe)
– installing
– removing
– changing (the technology, for example from SAS/SATA to PCIe)
–
Extension boxes
– installing
– removing
–
Specified expansion cards (for example Retimer, EP5xxi)
– replacing
Basic software procedures
94 Upgrade and Maintenance Manual RX2520 M5
To Next Page
Loading...
