HDD prefailure detection
Depending on your hardware configuration HDD prefailure detection will be
supported.
The requirements are:
–
iRMC S5 Firmware 1.2 or later
–
supported OOB RAID system
16.2.2.2 Indicator on the ODD
ODDs may have an indicator or not.
Figure 291: Indicator on the ODD (example)
1 Activity indicator
Activity indicator (1)
Status Description
off The ODD is inactive.
green on The storage medium is being accessed.
Appendix A
RX2520 M5 Upgrade and Maintenance Manual 447
To Next Page
Loading...
