▶
Fasten the 3.5-inch HDD with four screws.
Removing a 3.5-inch HDD from a 3.5-inch installation frame
▶
Please proceed in reversed order
.
Concluding steps
No steps needed.
7.4
3.5-inch HDD configurations
7.4.1 Overview of configurations
7.4.1.1 Configuration with up to four HDD modules
Figure 43: Configuration with up to four 3.5-inch HDDs
Position
Logical
drive
number
ServerView RAID Manager display name
(Enclosure number: Port number)
one SAS controller
[0] 0 Vendor Product (0)
[1] 1 Vendor Product (1)
[2] 2 Vendor Product (2)
[3] 3 Vendor Product (3)
Hard disk drive (HDD) / solid state disk (SSD)
130 Upgrade and Maintenance Manual RX2520 M5
To Next Page
Loading...
