5.3.12 Viewing and clearing the System Event Log (SEL)
You can view the System Event Log (SEL) using the ServerView
Operations Manager or the iRMC S5 web interface.
You can clear the System Event Log (SEL) using the iRMC S5 web
interface.
You can collect logs using the Infrastructure Manager.
Viewing the SEL using the ServerView Operations Manager
▶
In ServerV
iew Operations Manager Single System V
iew select
Maintenance from the Information / Operation menu.
▶
Under Maintenance select System Event Log.
▶
Select the message type(s) you want to display:
‐ Critical events
‐ Major events
‐ Minor events
‐ Informational events
Note on the Driver Monitor of the ServerView Operations Manager
The Driver Monitor view gives you an overview of the monitored
components as well as the associated events contained in the system
event log on the managed server.
Under
Monitored Components the monitored components are listed. If
a component has the status Warning or Error, you can select it in the
list and click Acknowledge. This confirms the event on the server side.
You may have to log on to the server beforehand. The status of the
component will then be reset to ok. To see the new status you must
refresh the Driver Monitor view with Refresh.
For more information on how to view and sort the SEL using ServerView
Operations Manager
, see the "ServerV
iew Operations Manager - Server
Management" user guide.
Basic software procedures
RX2520 M5 Upgrade and Maintenance Manual 85
To Next Page
Loading...
