13.4.2 Replacing the ID card holder
Field Replaceable Unit
(FRU)
Hardware: 10 minutes
Tools: tool-less
Preliminary steps
▶
"Locating the defective server" on page 43
.
▶
"Suspending BitLocker functionality" on page 65.
▶
"Shutting down the server" on page 45.
▶
"Disconnecting the power cord" on page 46.
▶
If applicable, "Removing 2.5-inch HDD/SSD modules" on page 175.
▶
"Getting access to the component" on page 47.
▶
"Removing the fan holder" on page 60.
▶
Remove the backplane 3, see "Removing the 2.5-inch HDD backplane" on
page 186.
Removing the ID card holder
▶
Remove the ID card, see Figure 282.
Front panel
374 Upgrade and Maintenance Manual RX2520 M5
To Next Page
Loading...
