CHAPTER 6
110
Routine Printer Maintenance
4/29/10 Rev G
3 Press the or key until the
Maintenance screen displays.
4 Press ENTER to display the
End of Day Clean screen.
5 Press the or key until the
Fill Ink Line screen displays.
6 Press ENTER to display the
Choose Color screen. Use the keys to display the color
ink line to fill. If you choose
All Colors, all ink lines will be filled sequentially.
7 Press ENTER to select the ink color and the working icon displays while the fill line
sequence is initiated.
8 The printer prompts you to
Remove the Head Access Door. Press ENTER when done. Set the
door aside on a disposable wipe. Press ENTER.
9 The printer prompts you to
Check the Ink Waste Tray. Remove the waste ink tray, empty
it if necessary, and replace the two all-purpose wipes if they are saturated (see page
93).
10 Reinstall the
waste ink tray and the working icon displays for approximately four
minutes while the ink lines fill.
11 The printer prompts you to
Open “INK COLOR” Purge Valve 1. Press ENTER when done.
End of Da
Clean
Open CYAN Purge Valve 1
Press ENTER when done
Cyan
Choose Color:
Status
Maintenance
Fill Ink Line
To Next Page
Loading...
