Gerber Solara ion User Manual

CHAPTER 7
134
Gerber Solara ion Web Pages
4/29/10 Rev G
View System Log
The View Log link displays the system Message Log. The Message Log records information and
error messages sent from the Gerber Solara ion. You can modify the System Log Level from 1
(lowest) to 9 (highest) using the System Settings web page. The default setting is 1 (lowest)
which records only the major errors and should be adequate for most users. The highest setting
records all messages sent to the printer and is used by Gerber Service for diagnostics. When the
System Log is turned off (set to 0 (OFF)), no messages are recorded.
The numbers in the brackets to the left of the message indicate the time the message was logged
since the printer was powered on. The time is displayed in
[hours : minutes : seconds : milliseconds].
The System Log can contain up to 32 kb of text messages. When the log becomes full, the newest
message replaces the oldest message in the log.

Gerber Solara ion Specifications

General

Brand	Gerber
Model	Solara ion
Category	Printer
Language	English