Gerber Solara ion User Manual

CHAPTER 5
77
Printing Jobs on the GERBER SOLARA ION
4/29/10 Rev G
Canceling a job
Cancel a job by pressing the CANCEL key on the control panel. After confirming the cancel the
printer stops and the job is cleared from the queue. You can clear other jobs in the queue by
pressing the CANCEL key as the jobs are received.
To cancel a job
1 To abort a job, press the CANCEL key while the job is running. The Confirm Cancel Job
screen displays.
2 Press ENTER when Cancel is selected and the
Canceled by user screen displays. (If you
do not wish to cancel the job, press ENTER when No is selected.)
3 Multiple jobs sent to the printer are cleared one at a time by repeating this procedure
as the jobs are received.
No Cancel
Confirm Cancel Job

Gerber Solara ion Specifications

General

Brand	Gerber
Model	Solara ion
Category	Printer
Language	English