Gerber Solara ion User Manual

CHAPTER 3
38
Setting up the GERBER SOLARA ION
4/29/10 Rev G
2 Press the  or  key until the Setup screen displays. Press ENTER to display Lamp
Delay
screen.
3 Press ENTER to display the
IP Address screen.
4 Press the  or  key to display the rest of the network settings including
Subnet Mask,
DHCP, and MAC Address.
Note: DHCP is currently disabled and is reserved for future use.
Setup
IP Address
192.168.0.50
MAC Address
00-50-C2-2D-34-58
DHCP
Disabled
Subnet Mask
255.255.255.000

Gerber Solara ion Specifications

General

Brand	Gerber
Model	Solara ion
Category	Printer
Language	English