Firmware Version 1.0.1.12
UCM6510 IP PBX User Manual
Call Forward Unconditional
Configure the Call Forward Unconditional target number so that the
incoming call to this extension will be always forwarded to the target
number. If not configured, the Call Forward Unconditional feature is
deactivated. The default setting is deactivated.
Select time condition for Call Forward Unconditional. CFU takes effect only
during the selected time condition. The available time condition are “Office
Time”, “Out of Office Time”, “Holiday”, “Out of Holiday”, “Out of Office Time
or Holiday” and “Specific”.
Note:
“Specific” has higher priority to “Office Times” if there is a conflict in
terms of time period.
Specific time can be configured on the bottom of the extension
configuration dialog. Scroll down the add Time Condition for specific
time.
Office Time and Holiday could be configured on page Settings->Time
Settings->Office Time/Holiday page.
Configure the Call Forward No Answer target number so that the incoming
call to this extension will be forwarded to the target number if the call is not
answered until the ringing times out. If not configured, the Call Forward No
Answer feature is deactivated. The default setting is deactivated.
Select time condition for Call Forward No Answer. The available time
condition are “Office Time”, “Out of Office Time”, “Holiday”, “Out of
Holiday”, “Out of Office Time or Holiday” and “Specific”.
Note:
“Specific” has higher priority to “Office Times” if there is a conflict in
terms of time period.
Specific time can be configured on the bottom of the extension
configuration dialog. Scroll down the add Time Condition for specific
time.
Office Time and Holiday could be configured on page Settings->Time
Settings->Office Time/Holiday page.
Configure the Call Forward Busy target number so that the incoming call to
this extension will be forwarded to the target number if the call is rejected
or the extension is in talking/busy status. If not configured, the Call
Forward Busy feature is deactivated. The default setting is deactivated.
Select time condition for Call Forward Busy. The available time condition
are “Office Time”, “Out of Office Time”, “Holiday”, “Out of Holiday”, “Out of
Office Time or Holiday” and “Specific”.