Firmware Version 1.0.1.12
UCM6510 IP PBX User Manual
Figure 29: Create New Holiday
Table 18: Create New Holiday
Specify the holiday name to identify this holiday.
Create a note for the holiday.
Select the month for the holiday.
Select the day for the holiday.
Check this option to show advanced options. If selected, please specify
the days as holiday in one week below.
Select the days as holiday in one week.
Enter holiday "Name" and "Holiday Memo" for the new holiday. Then select "Month" and "Day". The
system administrator can also define days in one week as advanced options. Once done, click on "Save"
and then "Apply Change" for the holiday to take effect. The holiday will be listed in the web page as the
figure shows below.