Grandstream Networks UCM6510 IP PBX - Figure 24: UCM6510 Email Settings

Firmware Version 1.0.1.12
UCM6510 IP PBX User Manual
Page 58 of 277
Display Name
Specify the display name in the FROM header in the Email.
Sender
Specify the sender's Email address.
For example, pbx@example.mycompany.com.
The following figure shows a sample Email settings on the UCM6510, assuming the Email is using
smtp.gmail.com as the SMTP server and the port number is 465.
Figure 24: UCM6510 Email Settings
Once the configuration is finished, click on "Save" first. Then click on "Test" button to make sure the Email
setting is working.
The following figure shows the new dialog prompted to test the Email setting. Fill in a valid Email address
to send a test Email to verify the Email settings on the UCM6510.