Firmware Version 1.0.1.12
UCM6510 IP PBX User Manual
2. Once created, it will be displayed on the follow me web page list. Click on to edit the Follow Me
configuration. Click on to delete the Follow Me.
The following table shows the Follow Me configuration parameters.
Table 58: Follow Me Settings
Configure to enable or disable Follow Me for this user.
Configure the Music On Hold class that the caller would hear while
tracking the user.
The added numbers are listed here. Click on to arrange the order.
Click on to delete the number. Click on to add new numbers.
Add a new Follow Me number which could be a ‘Local Extension’ or
‘External Number’. The selected dial plan should have permissions to dial
the defined external number.
Select the order in which the Follow Me destinations will be dialed to reach
the user: ring all at once or ring one after the other.
3. Click on “Follow Me Options” to enable or disable the options listed in the following table.
Table 59: Follow Me Options
Playback Incoming Status
Message
If enabled, the PBX will playback the incoming status message before
starting the Follow Me steps.
If enabled, the PBX will record the caller’s name from the phone so it can
be announced to the callee in each step.
Playback Unreachable Status
Message
If enabled, the PBX will playback the unreachable status message to the
caller if the callee cannot be reached.
To Next Page
Loading...
Need help?
General