Firmware Version 1.0.1.12
UCM6510 IP PBX User Manual
CLEANER
Users could configure to clean the Call Detail Report/Voice Records/Voice Mails/FAX automatically under
web GUI->Maintenance->Cleaner.
Figure 146: Cleaner
Table 90: Cleaner Configuration
Enable the CDR Cleaner function.
Enter 0-23 to specify the hour of the day to clean up CDR.
Enter 1-30 to specify the day of the month to clean up CDR.
Enter the Voice Records Cleaner function.
Select the file type(s) to be cleaned automatically.
Specify the Voice Records threshold from 0 to 99 by using local storage
status in percentage.
Enter 0-23 to specify the hour of the day to clean up Voice Records.
Enter 1-30 to specify the day of the month to clean up Voice Records.
All the cleaner logs will be listed on the bottom of the page.