Grandstream Networks UCM6510 IP PBX - Figure 96: Configure Extension for Fax Machine; Figure 97: Configure Inbound Rule for Fax

Firmware Version 1.0.1.12
UCM6510 IP PBX User Manual
Page 197 of 277
Figure 96: Configure Extension For Fax Machine
7. Go to web GUI->PBX->Basic/Call Routes->Inbound Routes page.
8. Create an inbound route to use the Fax analog trunk. Select the created extension for Fax machine in
step 4 as the default destination.
Figure 97: Configure Inbound Rule for Fax
Now the Fax configuration is done. When there is an incoming Fax calling to the PSTN number for the
FXO port, it will send the Fax to the Fax machine.