Firmware Version 1.0.1.12
UCM6510 IP PBX User Manual
CONFIGURE VOICEMAIL GROUP
The UCM6510 supports voicemail group and all the extensions added in the group will receive the
voicemail to the group extension. The voicemail group can be configured under web GUI->PBX->Call
Features->Voicemail Group. Click on "Create New Voicemail Group" to configure the group.
Figure 84: Voicemail Group
Table 53: Voicemail Group Settings
Voicemail Group Extension
Enter the Voicemail Group Extension. The voicemail messages left to this
extension will be forwarded to all the voicemail group members.
Configure the Name to identify the voicemail group. Letters, digits, _ and -
are allowed.
The Voicemail password for the user to check Voicemail messages.
The Email address of current user.
Voicemail Group Mailboxes
Select available mailboxes from the left list and add them to the right list.
The extensions need to have voicemail enabled to be listed in available
mailboxes list.
To Next Page
Loading...
Need help?
General