To Next Page

To Previous Page

Firmware Version 1.0.1.12

UCM6510 IP PBX User Manual

Page 163 of 277

JOIN A CONFERENCE CALL

Users could dial the conference bridge extension to join the conference. If password is required, enter the

password to join the conference as a normal user, or enter the admin password to join the conference as

administrator.

INVITE OTHER PARTIES TO JOIN CONFERENCE

When using the UCM6510 conference bridge, there are two ways to invite other parties to join the

conference.

 Invite from web GUI

For each conference bridge in UCM6510 web GUI->PBX->Call Features->Conference, there is an icon

for option "Invite a participant". Click on it and enter the number of the party you would like to invite.

Then click on "Add". A call will be sent to this number to join it into the conference.

Figure 75: Conference Invitation From web GUI

 Invite by dialing 0 or 1 during conference call

A conference participant can invite other parties to the conference by dialing from the phone during the

conference call. Please make sure option "Enable User Invite" is turned on for the conference bridge first.

Enter 0 or 1 during the conference call. Follow the voice prompt to input the number of the party you would

like to invite. A call will be sent to this number to join it into the conference.

0: If 0 is entered to invite other party, once the invited party picks up the invitation call, a permission will be

asked to "accept" or "reject" the invitation before joining the conference.

1: If 1 is entered to invite other party, no permission will be required from the invited party.

Grandstream Networks UCM6510 IP PBX User Manual

Questions and Answers: