Grandstream Networks UCM6510 IP PBX User Manual

Firmware Version 1.0.1.12
UCM6510 IP PBX User Manual
Page 110 of 277
Yellow: In Use
Grey: Unavailable
 Edit single extension
Click on to start editing the extension parameters.
 Reboot the user
Click on to send NOTIFY reboot event to the device which has an UCM6510 extension already
registered. To successfully reboot the user, "Zero Config" needs to be enabled on the UCM6510 web
GUI->PBX->Basic/Call Routes->Zero Config->Auto Provisioning Settings.
 Delete single extension
Click on to delete the extension. Or select the checkbox of the extension and then click on "Delete
Selected Extensions".
 Modify selected extensions
Select the checkbox for the extension(s). Then click on "Modify Selected Extensions" to edit the
extensions in a batch.
 Delete selected extensions
Select the checkbox for the extension(s). Then click on "Delete Selected Extensions" to delete the
extension(s).
EXPORT EXTENSIONS
The extensions configured on the UCM6510 can be exported to csv format file with selected technology
"SIP", "IAX" or "FXS". Click on “Import Extensions” scroll down to select "Export Extensions" button and
select technology in the prompt.
Figure 52: Export Extensions

Grandstream Networks UCM6510 IP PBX Specifications

General

Brand	Grandstream Networks
Model	UCM6510 IP PBX
Category	Processor
Language	English