Firmware Version 1.0.1.12
UCM6510 IP PBX User Manual
CHANGE LOG
This section documents significant changes from previous versions of the UCM6510 user manual. Only
major new features or major document updates are listed here. Minor updates for corrections or editing are
not documented here.
FIRMWARE VERSION 1.0.1.12
Added Active Calls feature to monitor call status and barge in active calls [ACTIVE CALLS AND
MONITOR]
Added support to disable the trunk for VoIP trunk and analog trunk [Table 42: SIP Trunk Configuration
Parameters] [Table 43: IAX Trunk Configuration Parameters] [Table 31: Analog Trunk Configuration
Parameters]
Added RBS support on T1 [DIGITAL TRUNKS]
Added Frame Relay support on Data Trunk [DATA TRUNK]
Added 'Assign CIC to D-channel' option on SS7 settings page [Table 35: Digital Hardware
Configuration Parameters: E1 - SS7]
Added 'First CIC' option in SS7 configuration [Table 35: Digital Hardware Configuration Parameters:
E1 - SS7]
Added 'D-Chan' selection for PRI and SS7 in editing digital ports [Table 34: Digital Hardware
Configuration Parameters: E1 - PRI_NET/PRI_CPE] [Table 35: Digital Hardware Configuration
Parameters: E1 - SS7]
Added support for Ring simultaneously feature for extensions [Table 28: SIP Extension Configuration
Parameters]
Added support for Music On Hold selection per extension [Table 28: SIP Extension Configuration
Parameters]
Added support to disable this extension per extension [Table 28: SIP Extension Configuration
Parameters]
Added ability to set personal password for making outbound calls per extension [Table 28: SIP
Extension Configuration Parameters]
Added 'TEL URI' configuration for SIP extension/VoIP trunk [Table 28: SIP Extension Configuration
Parameters] [Table 42: SIP Trunk Configuration Parameters]
Added E&M Immediate and E&M Wink signaling for T1 [DIGITAL TRUNKS]
Renamed the 'network backup' settings items to 'data sync' [DATA SYNC]
Added “Download Search Result” in CDR [CDR]
Added office time and holiday setting support [OFFICE TIME] [HOLIDAY]
Added time condition for call forward [EXTENSIONS]
Added support to monitor FXO trunk using SLA [SLA STATION]