Need help?Do you have a question about the Grandstream Networks UCM6510 IP PBX and is the answer not in the manual?
General| Brand | Grandstream Networks |
|---|---|
| Model | UCM6510 IP PBX |
| Category | Processor |
| Language | English |
Documents significant changes for firmware version 1.0.1.12.
Guides on physically connecting the UCM6510 for initial setup.
Accessing and using the web-based management interface.
Guide to making a basic call after initial setup.
Configuration of network interfaces and parameters.
Fundamental network interface configuration (Route, Switch, Dual).
Configuring the device's firewall for security.
Setting up fixed firewall rules and service monitoring.
Configuring dynamic threat detection and blacklisting.
Intrusion prevention feature for SIP authentication.
Security recommendation for changing default passwords.
Enabling and configuring the auto-provisioning feature.
Methods for discovering devices on the network for provisioning.
Base configuration policies applied to all Grandstream devices.
Creating reusable configuration templates for devices.
Creating configuration templates specific to device models.
Manually setting up configurations for new devices.
Viewing and editing discovered or manually created devices.
Adding new SIP extensions to the PBX.
Adding multiple extensions simultaneously.
Modifying existing extension settings.
Settings for configuring analog trunks.
Settings for configuring digital trunks.
Settings for configuring SIP and IAX trunks.
Rules for directing outgoing calls.
Rules for directing incoming calls.
Creating and configuring Interactive Voice Response menus.
General voicemail system configuration settings.
Setting up call queue parameters and strategies.
Using various call features via specific codes.
Fundamental SIP protocol configuration parameters.
Overview of the PBX component statuses.
Status of configured communication trunks.
Status of configured user extensions.
Overview of firmware upgrade procedures.
Method for remote firmware updates.
Method for local firmware updates.
Creating configuration backups.
Performing backup and restore operations.
Restoring the system from a backup file.
To Next Page