Grandstream Networks UCM6510 IP PBX User Manual

Firmware Version 1.0.1.12
UCM6510 IP PBX User Manual
Page 168 of 277
the timeout, a timeout prompt will be played. The default setting is 10
seconds.
Response Timeout Prompt
Select the prompt message to be played when timeout occurs.
Invalid Prompt
Select the prompt message to be played when an invalid extension is
pressed.
Response Timeout Repeat
Loops
Configure the number of times to repeat the prompt if no DTMF input is
detected. When the loop ends, it will go to the timeout destination if
configured, or hang up. The default setting is 3.
Invalid Repeat Loops
Configure the number of times to repeat the prompt if the DTMF input is
invalid. When the loop ends, it will go to the invalid destination if
configured, or hang up. The default setting is 3.
Language
Select the voice prompt language to be used for this IVR. The default
setting is "Default" which is the selected voice prompt language under web
GUI->PBX->Internal Options->Language. The dropdown list shows all
the current available voice prompt languages on the UCM6510. To add
more languages in the list, please download voice prompt package by
selecting "Check Prompt List" under web GUI->PBX->Internal
Options->Language.
Key Press Event
Select the event for each key pressing for 0-9, *, Timeout and Invalid. The
event options are:
 Extension
 Voicemail
 Conference Rooms
 Voicemail Group
 IVR
 Ring Group
 Queues
 Page Group
 Fax
 IVR Prompt
 Hangup
 DISA
 Dial By Name
 External Number

Grandstream Networks UCM6510 IP PBX Specifications

General

Brand	Grandstream Networks
Model	UCM6510 IP PBX
Category	Processor
Language	English