Grandstream Networks UCM6510 IP PBX - Alert Contact; CDR

Firmware Version 1.0.1.12
UCM6510 IP PBX User Manual
Page 249 of 277
 Alert Threshold: If the detected value exceeds the threshold (in percentage), the UCM6510
system will send the alert.
2. Modify Admin Password
Figure 124: System Events->Alert Events Lists: Modify Admin Password
 Detect Cycle: The UCM6510 will initiate the admin password check based on this cycle. Users
can enter the number and then select second(s)/minute(s)/hour(s)/day(s) to configure the cycle.
3. Memory Usage
Figure 125: System Events->Alert Events Lists: Memory Usage
 Detect Cycle: The UCM6510 will perform the memory usage detection based on this cycle. Users
can enter the number and then select second(s)/minute(s)/hour(s)/day(s) to configure the cycle.
 Alert Threshold: If the detected value exceeds the threshold (in percentage), the UCM6510
system will send the alert.
4. System Reboot
Figure 126: System Events->Alert Events Lists: System Reboot