Grandstream Networks UCM6510 IP PBX User Manual

Firmware Version 1.0.1.12
UCM6510 IP PBX User Manual
Page 183 of 277
PAGING AND INTERCOM GROUP
Paging and Intercom Group can be used to make an announcement over the speaker on a group of
phones. Targeted phones will not ring but answer immediately using speaker. The UCM6510 paging and
intercom can be used via feature code to a single extension or a paging/intercom group. This sections
describes the configuration of paging/intercom group under web GUI->PBX->Call
Features->Paging/Intercom.
CONFIGURE PAGING/INTERCOM GROUP
 Click on "Create New Paging/Intercom Group" to add paging/intercom group.
Figure 87: Paging/Intercom Group
Table 55: Paging/Intercom Group Configuration Parameters
Name
Configure paging/intercom group name.
Extension
Configure the paging/intercom group extension.
Type
Select "2-way Intercom" or "1-way Page".
Custom Prompt
This option is setting a custom prompt used as announcement placed to
the person receiving a paging/internal call. The file can be uploaded from
the web GUI->Internal Options->Custom Prompt, or click the ‘Prompt’ to
add additional recorded.
Page/Intercom Group
Select available users from the left side to the paging/intercom group

Grandstream Networks UCM6510 IP PBX Specifications

General

Brand	Grandstream Networks
Model	UCM6510 IP PBX
Category	Processor
Language	English