Grandstream Networks UCM6510 IP PBX - Queues

Firmware Version 1.0.1.12
UCM6510 IP PBX User Manual
Page 238 of 277
Table 76: Trunk Status
Status
Display trunk status.
 Analog trunk/Digital trunk status:
Available
Busy
Unavailable
Unknown Error
Error Configured: Incorrect signaling configuration between the two
devices. For example, both of the devices are configured as CPE or NET.
 SIP Peer trunk status:
Unreachable: The hostname cannot be reached.
Unmonitored: QUALIFY feature is not turned on to be monitored.
Reachable: The hostname can be reached.
 SIP Register trunk status:
Registered
Unrecognized Trunk
Trunks
Display trunk name
Type
Display trunk Type:
 Analog
 E1/T1/J1
 SIP
 IAX
Username
Display username for this trunk.
Port/Hostname/IP
Display Port for analog trunk, or Hostname/IP for VoIP (SIP/IAX) trunk.
Other operations are also available in trunk status section:
 Click on "Trunks", the web page will redirect to trunk configuration page which can also be accessed
via web GUI->PBX->Basic/Call Routes->Analog Trunks.
 Click on to refresh the trunk status.
 Click on [ + ] to expand the status detail table.
 Click on [ - ] to hide the status detail table.
EXTENSIONS
Users could see all the configured extension status in this section.